-
Install OpenWrt:
Download and install OpenWrt from the official website.
-
Set Up Root User:
sudo mkdir -p /root && sudo user-modify -m "root" root
-
Firewall Configuration:
firewall -i /etc/firewall -s local -f 8 -t http -p 8 firewall -i /etc/firewall -s local -f 443 -t https -p 443
-
Network Configuration: Create a /etc/subnetconf file:
sudo nano /etc/subnetconf
Add:
netmask /.../256 address 1.1.1.1/256 ip 192.168.1.1/256 network 8.8.8.8/256 mask 255.255.255./256
-
Update IPv4 Address Mapping:
sudo modmap -a /etc/firewall -f 8 -t http -p 8
-
Install Basic Linux Module:
sudo apt-get install -y openmodmap sudo mod manager
Install kernel modules:
sudo apt-get install -y libopenkde1 sudo apt-get install -y libopenwrt4-1.14-22.1.1
Install OpenWrt package:
sudo apt-get install -y openwrt
-
Install User for Security:
sudo apt-get install -y openwrt
-
Create 'wrt' User in Root:
sudo mkdir -p /wrt && sudo user-modify -m "wrt" wrt /wrt
-
Configure Password Reset:
sudo nano /etc/wrt.conf
Add:
pwd -p /path/to/wrt/wrt.conf -s /path/to/wrt/user-wrt -f 36 pwd -p /path/to/wrt/user-wrt -s /path/to/wrt/user-wrt -f 36
-
Set Password Reset Mechanism:
sudo nano /etc/wrt.conf
Add:
pwd -p /path/to/wrt/wrt.conf -s /path/to/wrt/user-wrt -f 36 pwd -p /path/to/wrt/user-wrt -s /path/to/wrt/user-wrt -f 36
-
Enable Password Reset:
sudo nano /etc/wrt.conf
Add:
pwd -p /path/to/wrt/wrt.conf -s /path/to/wrt/user-wrt -f 36 pwd -p /path/to/wrt/user-wrt -s /path/to/wrt/user-wrt -f 36
-
Enable 'wrt' User Management:
sudo nano /etc/wrt.conf
Add:
wwm -s /path/to/wrt/user-wrt wkt -s /path/to/wrt/user-wrt
-
Enable 'wrt' User:
sudo nano /etc/wrt.conf
Add:
wrm -m /path/to/wrt/user-wrt
-
Enable Mod Manager:
sudo mod manager enable -u wrt
-
Enable OpenWrt User:
sudo user mod -u root wrt
-
Enable 'wrt' User Management (Multiple times if needed)
sudo nano /etc/wrt.conf
Add each line as required.
-
Enable Password Reset Mechanism (Multiple times if needed)
sudo nano /etc/wrt.conf
Add each line as required.
-
Enable Password Reset (Multiple times if needed)
sudo nano /etc/wrt.conf
Add each line as required.
By following these steps, you'll have a properly configured OpenWrt user ready for scientific use.
